Channel drain

catalogue

channel drain // skinny channel // basin channel // round drain // square drain // pocket drain

anchor: channeldrain

channeldrain

details

technical specifications

design drawings

details

Easy to install and made by the mm to fit your shower enclosure exactly and to any length
To fit wall to wall, against one or two walls or for free placing away from walls
Grate width from 100mm upwards
Smaller grate sections for long channels
Tile over or visible grates
Effective 5mm drainage gap
Outlet anywhere along the channel avoids obstructions below
Made from robust 2mm AISI 304 Stainless steel
Tangs for concrete installation
Compatible for liquid and sheet tanking systems

technical specifications

Fabricated to any length for easy installation.
Flange for liquid / sheet tanking membrane
High displacement drains and traps, up to 102 litres per minute.
2mm / 3mm AISI 304 stainless steel.
Minimum grate width 100mm with 5mm perimeter drainage gap.
Made to suit any floor build up.
Positioning; free placing, or with vertical flanges to go against one, two or three walls.
Channel spigot / outlet can be positioned anywhere along the channel to avoid conflicting with services / joists below.
Lower parts push fit onto the spigot with a horizontal or vertical outlet in 50mm, 75mm or 110mm.
Lower parts can rotate 360 degrees and can tilt slightly.
Lift out basket filter
Two-part easy remove / clean stainless steel trap.
Stainless steel fixing screws and grate removing tool provided.
Uk production time 2 weeks.

design drawings