Skinny channel

catalogue

channel drain // skinny channel // basin channel // round drain // square drain // pocket drain

anchor: skinnychannel

skinnychannel

details

technical specifications

design drawings

details

Easy to install and made by the mm to fit your shower enclosure exactly and to any length
To fit wall to wall, against one or two walls or for free placing away from walls
Grate width from 50mm to 90mm
Smaller grate sections for long channels
Tile over or visible grates
Effective 5mm drainage gap
Outlet anywhere along the channel avoids obstructions below
Made from robust 2mm AISI 304 Stainless steel
Tangs for concrete installation
Compatible for liquid and sheet tanking systems

technical specifications

Fabricated to any length for easy installation with a slim removable grate.
Flange for liquid / sheet tanking membrane
High displacement trap up to 42 litres per minute per outlet.
2mm / 3mm AISI 304 stainless steel.
Made to suit any wall and floor build up.
Positioning; free placing, or with vertical flanges to go against one, two or three walls.
Minimum grate width 50mm to 90mm with 5mm perimeter drainage gap.
Channel spigot / outlet can be positioned anywhere along the channel to avoid conflicting with services / joists below.
The lower part push fits onto the spigot with a 50mm horizontal outlet only.
Lower part can rotate 360 degrees.
One-piece easy remove / clean stainless-steel trap.
Stainless steel fixing screws and grate removing tool provided.
Uk production time 2 weeks.

design drawings